Es-Link Ethernet+USB Bridge/Router Modem

Product description

The KCE2000U includes the ADSL CPE modem itself, the power supply. It also includes both software running on KCE2000U and on the PC side.KCE2000U provides Full rate(ANSI and G.DMT)as well as G.lite support, and can be connected to the PC through Ethernet. A wide variety of network stacks are supported on the protocol processor. The KCE2000U is easy to connect. You just have to plug the right cable at the right place. Upon boot up the software automatically starts executing, if a DSLAM/ATU_C is connected at the other end handshake takes place.

Features

Combines an always-on high speed Asymmetric Digital Subscriber Line (ADSL) connection to the telephone line, and Ethernet or USB(optional) connection to a host PC or Ethernet hub into a single cost-effective solution. Compliant with the full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1) ADSL standards, and with the splitterless ITU G.lite (G.992.2) specification. Designed for Customer Premise Equipment and supports downstream data rates of up to 8 Mbps and upstream data rates of up to 1 Mbps. Supports both USB(optional) and Ethernet to enable the widest array of host connectivity. Simple, easy-to-use, Web interface for all setup and provisioning

Application

• ADSL Customer Premise Equipment
• ADSL Ethernet bridges
• ADSL Ethernet routers
• ADSL USB modems for desktop and notebook PCs(optional)
• ADSL modem for embedded platforms